LM35 Temperature Sensor Original
Calibrated directly in Degree Celsius (Centigrade)
Linear at 10.0 mV/°C scale factor
0.5°C accuracy guarantee-able (at a25°C)
Suitable for remote applications
Low cost due to wafer-level trimming
Operates from 4 to 30 volts
Less than 60 mA current drain
Low self-heating, 0.08°C in still air
Non-linearity only 0.25°C typical
LM35 Temperature Sensors
The LM35 is an integrated analog temperature sensor that provides an output directly proportional to the temperature in degrees Celsius. It offers accurate temperature measurements without the need for external calibration or trimming. With its low output impedance, linear response, and precise calibration, the LM35 simplifies integration with readout or control circuits.
No additional components are required to interface the LM35 with an ADC, as its output is linear at a rate of 10mV per degree Celsius. It can be directly connected to any 10-bit or 12-bit ADC. However, for 8-bit ADCs like the ADC0808 or ADC0804, an amplifier is needed to detect temperature changes as small as 1°C.
The LM35 can also be easily interfaced with an Arduino, and its temperature output can be used with a comparator circuit for over-temperature detection or connected to a relay for temperature control applications.
The LM35 operates across a wide temperature range, from −55°C to 150°C, while the LM35C version is rated for −40°C to 110°C, with improved accuracy in the lower temperature range. The LM35 series is available in hermetic TO-Transistor packages, while the LM35C, LM35CA, and LM35D versions come in plastic TO-92 packages. The LM35D is also available in an 8-lead surface-mount small-outline package or a plastic TO-220 package.
Features
Calibrated directly in Degree Celsius (Centigrade)
Linear at 10.0 mV/°C scale factor
0.5°C accuracy guarantee-able (at a25°C)
Suitable for remote applications
Low cost due to wafer-level trimming
Operates from 4 to 30 volts
Less than 60 mA current drain
Low self-heating, 0.08°C in still air
Non-linearity only 0.25°C typical
Low impedance output, 0.1Ωfor 1 mA load
Specification
| Package/Case | TO-92-3 |
|---|---|
| Mounting Type | Through Hole |
| Sensor Type | Temperature Sensor |
| Output Type | Analog Voltage |
| Maximum Supply Voltage (V) | 30 |
| Minimum Supply Voltage (V) | 4 |
| Operating Temperature (°C) | -55 to 150 |
Application
Measuring temperature of a particular environment
Providing thermal shut down for a circuit/component
Monitoring battery temperature
Measuring temperatures for HVAC applications
Industrial process temperature control
Package Include
1 x LM35 TO-92-3 Board Mount Temperature Sensor IC.
Our latest Products
Check out what's new in our company !